New year, new job? View the vacancies! More ...

09.11.2022
‌
Company

The two companies combine decades of experience in the field of efficient mobile cooling compressors with expertise in developing innovative and reliable solutions for medical transport boxes.

Secop Group and B Medical Systems announce a joint development agreement

Secop GmbH, a globally leading provider of advanced cooling solutions for mobile, battery-powered applications, commercial and medical cold chains, and B Medical Systems, a worldwide leader in cold chain solutions for vaccines and a leading manufacturer of medical cold chain solutions, have announce…

The Ecobulk SX-D from Schütz ensures the safe transportation of demanding filling goods even under extreme conditions. (Photo: SCHÜTZ)

The steel shell of the Ecobulk SX-D was completely closed, riveted and welded to the steel bottom tray. It functions as an additional container, liquid-tight. (Photo: SCHÜTZ)

09.11.2022
‌
Packaging, Foil

Schütz Ecobulk SX-D guarantees maximum safety thanks to double-walled construction

For maximum protection against leakage even under extreme conditions, the packaging experts at Schütz have developed the Ecobulk SX-D. To further enhance safety standards, the container model features a sealed, fire-resistant outer shell made of steel. The filling opening and the discharge points ar…

Group photo Sumitomo (SHI) Demag at K 2022.

Gerd Liebig, CEO of Sumitomo (SHI) Demag Plastics Machinery GmbH, world market leader of all-electric injection molding machines.

09.11.2022
‌
Trade fair

Gerd Liebig evaluates the success of global trade fair, signalling it as being a step towards normality.

Sumitomo (SHI) Demag CEO gives K 2022 positive approval

Sumitomo (SHI) Demag Plastics Machinery GmbH, Schwaig – November 2022: Gerd Liebig, CEO of Sumitomo (SHI) Demag, concludes that K 2022 was overall a positive exhibition. Although the number of visitors to the world’s leading trade fair dropped by 21 percent compared to 2019, there was an increase in…

08.11.2022
‌
Trade fair

Integrated professional forums offer an overview of top trends in research, product development and production

COMPAMED 2022: The halls are fully booked, and there are important impulses for the medical technology industry

The world of medical technology looks confidently towards Düsseldorf. From 14 to 17 November, the internationally leading trade fairs COMPAMED, for suppliers, and MEDICA, for medicine, are being held here in parallel. Based on the current number of bookings, far more participants than last year are…

The smart RFID syringe label combines the marking of a syringe with its unique, digital identity.

08.11.2022
‌
Conference

Premiere at PDA: Prefilled Syringes with RFID-Labels

Pharma label expert Schreiner MediPharm and SCHOTT Pharma, the specialist in drug containment and delivery solutions for medications, have been engaged in a partnership for several years. Its objective is to develop new smart concepts that add functional value to prefilled syringes. At the PDA Unive…

The CNp Technology: A Game-Changer in High Purity Processes: Last year, LPW obtained the European patents for the CNp process (Cyclic Nucleation), which has been in use and internally developed for years, following international rights. CNp acts directly on the boundary layer of a component, even in hard-to-reach internal contours (such as 3D implants or fine capillaries and lumens). Through targeted pressure fluctuations within the liquid-specific vapor pressure curve, the formation of vapor bubbles, the cleaning effects of gentle cavitation, and effective media exchange, contaminants are dissolved and, if necessary, residual contamination carried along is safely removed. With the ultrasound-CNp combination as a process enhancer, LPW also tackles the most challenging tasks in fields such as medical technology or high vacuum technology.

New CNp System: Small Powerhouse for Highest High Purity
New to the LPW portfolio is the space-saving standard chamber system PowerJet compact CNp. The two-stage system with integrated steam intermediate rinse occupies just under 4 m² and features, in addition to ultrasonic and Cyclic Nucleation (CNp) cleaning processes, the necessary drying for higher requirements. This can be implemented in the form of hot air as well as infrared vacuum drying. Furthermore, the new system is equipped with a treatment chamber embedded within the two pre-treatment tanks, suitable for goods up to a batch size of 600 x 400 x 300 mm and weights up to 150 kg. The sandwich construction supports cleaning and rinsing processes as well as drying through a higher temperature level. The recirculation system features integrated full-flow filtration with a filter area of over 4 m² and filter units up to 0.5 µm. Currently, the small powerhouse is available in two versions. More info: www.lpw-cleaning.de.

1. New products in medical technology, such as additively manufactured implants, pose new challenges for cleaning equipment manufacturers. Additionally, there are regulatory requirements (in Europe, the Medical Device Regulation) that must be addressed. (Photo: LPW)

2. Capillary structures, such as in fine channels and tubes, are subject to the highest cleanliness standards depending on their intended use. Due to their aspect ratio (the ratio of inner diameter to length), these components make the use of most known cleaning methods impossible and also challenge the rinsing and drying processes. Here is a 300 mm long glass capillary with an inner diameter of approximately 50 µm. (Photo: LPW)

3. In laser and high vacuum technology, cleaning is confronted with delicate and highly precise processed surfaces – such as mirrors, for example. (Photo: LPW)

4. The influences of drying on the degree of technical cleanliness are often underestimated. For example, energy-efficient recirculating air drying tends to concentrate the finest organic and inorganic contaminants, which can lead to recontamination of the components. Therefore, LPW uses environment-decoupled infrared systems. (Photo: LPW)

07.11.2022
‌
Technical cleanliness

Just cleaning was yesterday

High Purity requires technical cleanliness throughout the entire process chain

The entire manufacturing industry is undergoing technological change. And this worldwide. Changed mobility concepts, digitalization, and the production of completely new products are leading to higher demands on technical cleanliness. Cleaning alone is no longer sufficient. Highly clean environments…

07.11.2022
‌
Universities

Innovative training concepts in the high-tech sector

Micro- and Nanotechnology at the Zweibrücken Campus

Microtechnology is considered one of the key technologies of the 21st century. Without microtechnology, modern goods of industry are unthinkable: cars, smartphones, modern industrial production, life-saving medical technology – without microtechnology, none of this would work! As part of the project…

07.11.2022
‌
Disinfection | procedures, devices, agents, media (Wipers, Swaps,...)

TKSAGE Technology Group Provides Advanced Bio-decontamination with Vaporized Hydrogen Peroxide

TKSAGE (Shenzhen) Technology Group Co., Ltd. provides R&D, equipment, and installation of cleaning and sterilization technology and is committed to providing state-of-the-art solutions for customers in life science and healthcare. Since its establishment in 2008, TKSAGE has always regarded produ…

New fully automated warehouse for packaging materials. © Vetter Pharma International GmbH

07.11.2022
‌
New building

Additional investments across the company support customer supply needs

New fully automated Vetter warehouse expands storage and boosts logistical infrastructure

With a total investment of approx. 20 million euros, the new fully automated building provides storage space for materials with high-stock turnover rates such as packaging components and thus optimizing our logistical infrastructure. In addition, valuable capacity will be freed up in the existing wa…

07.11.2022
‌
Conversion

VACOM plant expansion of its own production capacities in Großlöbichau

Prepared for growth

The VACOM Vacuum Components & Measurement Technology GmbH in East Thuringia, Großlöbichau near Jena, plans to significantly expand its capacities in the coming years. Today, a first draft was presented at a press conference in Großlöbichau. Currently, managing partner Jens Bergner estimates a possib…

A look at the NEWSLETTER

Better informed: With YEARBOOK, NEWSLETTER, NEWSFLASH, NEWSEXTRA and EXPERT DIRECTORY

Stay up to date and subscribe to our monthly eMail-NEWSLETTER and our NEWSFLASH and NEWSEXTRA. Get additional information about what is happening in the world of cleanrooms with our printed YEARBOOK. And find out who the cleanroom EXPERTS are with our directory.