New year, new job? View the vacancies! More ...

The U-shaped floor plan allows the independence of both institutes to be structurally maintained. (Image rights: Mischa Lötzsch from 4-Motions)

As you approach the building, the simple overall shape dissolves into fine facade details. (Image rights: Mischa Lötzsch from 4-Motions)

17.04.2015

topping-out ceremony for the new institute building dedicated to the research of neurodegenerative diseases in Göttingen - pbr AG provides the overall planning for the research building

Modern prerequisites for interdisciplinary research

Currently, about 1.5 million people in Germany are affected by dementia. A large portion of them are affected by Alzheimer's disease. A clinical picture that presents particular challenges for research. In the new building of the Institute for Biostructural Imaging of Neurodegeneration (BIN) and the…

Key-ready test chamber from Weiss Klimatechnik – including thermal insulation.

16.04.2015
‌
Buildings & Rooms

Modern measurement and cleanroom technology for time and cost efficiency

If measurement and cleanroom technology fails or works unreliably, people's health is at risk. Anyone who wants to set up or renovate a measurement or cleanroom should therefore not only consider the quality of the equipment but also check the service offerings of a provider. This is especially true…

TROLLEY LIGHT with height adjustment (Image: Systec & Solutions GmbH)

16.04.2015
‌
Furnishing & equipment

Individual adaptation to work situations for TROLLEY and ceiling-mounted systems

Systec & Solutions can now supply ergonomic height adjusters for TROLLEY and ceiling-mounted systems. These permit simple adaptation of the HMI system monitor height to suit different work situations and the height of the user.

The entire height adjuster is made of stainless steel and adjustment is p…

Figure 1: Highly accurate EE660 airflow transmitter for duct mounting. (Photo: E+E Elektronik GmbH)

EE660 Air Velocity Transmitter with Display and Remote Probe. (Photo: E+E Elektronik GmbH)

16.04.2015
‌
Service

High measurement accuracy down to 0.15 m/s

Transmitter for Very Low Air Velocity

The new EE660 air velocity transmitter from E+E Elektronik measures air velocity down to 0.15 m/s and is particularly suitable for laminar flow control and other clean room applications. The E+E thin film sensor used in EE660 operates on the hot film anemometer principle which is characterized by hi…

From formulation to secondary packaging: At Achema, Bosch Packaging Technology showcases an exemplary line that encompasses all process steps for the production, filling, and packaging of medicines against autoimmune diseases administered in syringes.

Fully integrated glove testing system: With the new wireless glove testing system from Bosch, up to 35 gloves can be reliably tested for integrity simultaneously.

16.04.2015

From formulation to secondary packaging

Drugs against autoimmune diseases: model line from Bosch comprises all process steps

- New, small-volume fermenter for product development
- Flexible filling and closing processes combined with isolator and new wireless glove testing system
- Comprehensive portfolio for handling, sterilization, inspection and secondary packaging

At Achema, Bosch Packaging Technology presents an exemp…

The design of the Care-O-bot® 4 reflects its functionalities. (Source: Fraunhofer IPA)

The arms continue the clear lines of the torso and are particularly mobile due to the ball joints. (Source: Fraunhofer IPA)

Three individually driven and steerable wheels under the platform make the robot agile even in tight spaces. (Source: Fraunhofer IPA)

16.04.2015
‌
R+D & Community of Interest

Desirable Red Dot Design Award for Care-O-bot® 4

A characteristic figure with a slender form and clear lines: This is how the new generation of service robot Care-O-bot® presents itself. The product design has delighted this year's jury of the Red Dot Design Awards: they awarded Care-O-bot® 4 their renowned prize. The award is also a recognition f…

16.04.2015

A few weeks before the closing date for registrations, Messe Düsseldorf is recording extremely lively demand for exhibition space.

K 2016 – pointing the way forward for the world's plastics and rubber industry

With a few weeks to go before the closing date for registrations for K 2016, one thing is already certain: the fair will again provide a complete overview of the world market of the plastics and rubber industry. Some 3,000 exhibitors will be attending the world's premier fair, which is taking place…

The innovative EcoCVac dry-cleaning system was developed for an energy-saving intermediate cleaning of powertrain parts. It requires no compressed air. (Photo: Dürr Ecoclean)

With its upright, flow-optimized media containers, the EcoCWave in its new two-tank version enables higher cleaning quality while simultaneously extending the bath life. (Photo: Dürr Ecoclean)

For fine cleaning tasks, for example with machine tools before coating, various design features such as the four-sided overflow developed by UCM ensure consistently high part cleanliness. (Photo: Dürr Ecoclean)

16.04.2015

Dürr Ecoclean to present cleaning innovations for the automotive and general industries at parts2clean

Innovative solutions for stable cleaning processes of superior efficiency and sustainability

At this year's parts2clean trade fair in Stuttgart, Dürr Ecoclean will present the innovative EcoCVac dry cleaning system for an energy-saving intermediate cleaning of powertrain components. Moreover, new developments in the fields of aqueous and solvent-based cleaning will be presented. All of thes…

16.04.2015

Developed for solar and flat-screen production

New ball bearings for cleanroom applications at NSK

An essential component of flat screens and solar collectors are highly sensitive foils, which, for example, induce the polarization of light and serve as filters. During the production of these high-performance foils, conveying devices are used that must operate very smoothly even at very low torque…

The Südpack Medica AG is part of the Südpack Packaging Group. The company manufactures medical sterilization packaging at three locations using coextruded and laminated materials.

The Südpack Medica AG belongs to the Südpack Packaging Group. The company produces medical sterilization packaging at three locations using coextruded and laminated materials.

16.04.2015

Subsidiary of the Südpack Group informs about its offerings in the field of medical sterilization packaging

Südpack Medica at Medtec Europe 2015: Customized Packaging for Medical Devices

Medtec Europe is Europe's largest trade fair for the design and technology of medical equipment. From April 21 to 23, 2015, around 800 international exhibitors will gather at Messe Stuttgart. With theme pavilions covering areas such as Medical Packaging and Medical Plastics Technology, the packaging…

A look at the NEWSLETTER

Better informed: With YEARBOOK, NEWSLETTER, NEWSFLASH, NEWSEXTRA and EXPERT DIRECTORY

Stay up to date and subscribe to our monthly eMail-NEWSLETTER and our NEWSFLASH and NEWSEXTRA. Get additional information about what is happening in the world of cleanrooms with our printed YEARBOOK. And find out who the cleanroom EXPERTS are with our directory.