New year, new job? View the vacancies! More ...

The console solutions from ACL are a flexible modular system. Essentially, they consist of a back part that is either embedded into the wall (In-Wall) or mounted on it (On-Wall). This element is complemented by a front component, to which the display and the optional PC hardware component are attached. (Source: ACL GmbH)

ACL guarantees the quality of its devices through careful sourcing of components and a high level of manufacturing depth. For example, the company cuts and prints its glass, can bond displays and glass using an internal bonding machine, manufactures the housing in-house, and also laminates its touchscreens itself. (Source: ACL GmbH)

At this year's Medica, the individual integration of the ACL wall consoles with a full-glass wall will be presented, simulating an operating room situation and corresponding workstations. (Source: ACL GmbH)

23.10.2019

Comprehensive support and high production depth enable custom-made products

Visualization concepts for the operating room of the future: Customized integration solutions for modular wall consoles deliver razor-sharp images up to a resolution of 4K

Especially in the clinical environment, the demand for digital image display through modern screens is increasing, on which even the smallest color nuances can be recognized without confusion. Often, such imaging systems are installed in the operating room walls for space and overview reasons. Howev…

23.10.2019
‌
Furnishing & equipment

Calibration Laboratory of vali.sys GmbH

Calibrated according to the latest guidelines and requirements based on ISO 21501-4. The internal process of calibration is, among other things, aligned with our quality management system (ISO 9001:2015) and clearly defined. This ensures flawless documentation. After an incoming inspection and funct…

23.10.2019
‌
Buildings & Rooms

nora systems as exhibitor at industry events Cleanzone and Productronica

Create a secure foundation for processes

Future-oriented and safe flooring solutions are an absolute must in cleanrooms and highly technical production environments. At the two top industry events, Cleanzone in Frankfurt and Productronica in Munich, nora systems will present in November the advantages of rubber flooring systems for these h…

23.10.2019

Spang & Brands – COMPAMED, Düsseldorf, 18. - 21. November 2019, stand 8a M33

Spang & Brands GmbH shows plastic examples in medical device competence

During COMPAMED Spang & Brands GmbH, Friedrichsdorf, Germany, will exhibit a variety of different plastics engineering solutions for applications in medical technology, such as connectors, caps and closures with piercing membranes, implant components, and parts for minimally invasive medicine, p…

20.10.2019

Psychologically and physiologically based color concepts - against the white noise in the cleanroom

Color Atelier Space for Color – Interior Design & Color Styling

Color Atelier Space for Color – Interior Design & Color Styling

The Color Atelier Space for Color is a collaboration between the Color Atelier Schleicher and the Interior Design Office Space for Color, based in Karlsruhe. The Color Atelier Schleicher was founded in 1980 by Alfred Schleicher (dipl. Co…

The Yukon continuous systems from BvL are particularly suitable for cleaning series components with a continuous material flow.

The round conveyor systems Twister complement the BvL product portfolio and ensure the highest cleaning efficiency with minimal space requirements.

18.10.2019

Cleaning of cast parts: Demand-oriented plant variety

Comprehensive cleaning requirements exist during the production and mechanical processing of cast parts. The cleaning systems from BvL Surface Technology offer a variety of options to achieve the desired cleaning results. For 30 years, the experienced manufacturer from Emsbüren has been producing cu…

The Twister rotary indexing system from BvL achieves high cycle times and reliable cleanliness while requiring little space within the automated production line.

Three throttle valves that need to be cleaned are placed by robots on specially manufactured workpiece holders and rotated through the treatment chambers as part of the automatic cycle mode.

18.10.2019

The BvL Twister rotary indexing system ensures optimum component cleanliness in robot cells.

Perfect technology with a minimal footprint for KSM

The Hildesheim-based company KSM Castings Group – a renowned manufacturer of cast components – is solving its cleaning requirements within the scope of a new order to produce throttle valves using a new Twister rotary indexing system.

As a specialist supplier in the automotive industry, the KSM Casti…

The new MAFAC vector kinematics allows for a variety of application angles onto the component surfaces from different directions.

The basis of the new process is a pivoting AND rotating nozzle tube.

Workpieces with complex geometries such as drilled holes and undercuts, in particular, benefit from the targeted turbulences of MAFAC vector kinematics.

Especially workpieces with complex geometries such as drilled holes and undercuts benefit from the targeted turbulence of MAFAC vector kinematics.

In cleaning processes with a rigid nozzle system, the partially unexposed regions (red) outweigh the optimally exposed areas (green).

Thanks to angular variance, the MAFAC vector kinematics leads to a significantly better exposure of the components. Optimally (green) and partially (yellow) exposed regions clearly outweigh unreached locations (red).

Residual dirt of a component that was treated with a cleaning method using a rigid nozzle system.

Almost particle-free: The surface of a component cleaned with MAFAC vector kinematics: The amount of particulate contamination is 30% lower than with a stationary spray nozzle.

18.10.2019

A new dimension of dynamic cleaning

Vector kinematics

MAFAC cleaning machines set global standards in terms of cleaning quality, efficiency and application diversity. The patented process technology of counter- or co-rotating movements of spraying system and basket receptacle system is a crucial component of this corporate success. MAFAC has further de…

The visitors arrived with specific tasks for DeburringEXPO, allowing for intensive technical discussions that promise good post-trade fair business.

A sector that was highlighted for the first time at this year's leading trade fair was the post-processing of additively manufactured components.

Numerous exhibitors used the leading trade fair to showcase new and further developed solutions, including a robot system for deburring with ultrasound.

49 percent of visitors gathered information in the expert forum about trends, current developments, and solution offers for process optimization. (Image source: DeburringEXPO)

18.10.2019

3. Leading trade fair for deburring technologies and precision surfaces continues the success of the previous event

DeburringEXPO impresses with quality and high-quality contacts

Deburring and the production of precision surfaces are very specialized manufacturing topics that are becoming increasingly important for companies. This was evident at the third DeburringEXPO from October 8 to 10, 2019: Almost every one of the approximately 2,100 visitors arrived with a specific ta…

The Libelle Product Control detects a misaligned component on the workpiece carrier using the app

Libelle Product Control uses the “Position Monitoring” app to detect incorrectly positioned components on the workpiece holder.

All components are correctly positioned so that the spray system, specifically designed for these components, can perform optimal cleaning.

All components are positioned correctly, allowing the specially aligned nozzle system to carry out optimum cleaning.

The NiagaraDFS basket washing system from BvL, for example, offers optimal integration options for Libelle Product Control.

18.10.2019

Libelle Product Control from BvL detects position deviations

Component check: the perfect position for top quality cleaning

With a new product from the intelligent cleaning portfolio, BvL Oberflächentechnik GmbH offers new options for component control: Libelle Product Control generates photographs and stores these for various applications. Initially, the “Position Monitoring” application monitors the feeding and alignme…

A look at the NEWSLETTER

Better informed: With YEARBOOK, NEWSLETTER, NEWSFLASH, NEWSEXTRA and EXPERT DIRECTORY

Stay up to date and subscribe to our monthly eMail-NEWSLETTER and our NEWSFLASH and NEWSEXTRA. Get additional information about what is happening in the world of cleanrooms with our printed YEARBOOK. And find out who the cleanroom EXPERTS are with our directory.