More ...
Systec & Solutions GmbH C-Tec MT-Messtechnik PMS



  • Automation
  • Translated with AI

Precision for Sensitive Processes: SMC Showcases Automation Technology for Semiconductor Manufacturing

New solutions for electrostatic discharge, low-contact handling, and monitoring sensitive processes at SEMICON Europa 2026.

The IZS51 provides fast and reliable discharge with automatically regulated ion balance and full control via an optional IO-Link interface and an integrated valve for regulating the supporting compressed air.
The IZS51 provides fast and reliable discharge with automatically regulated ion balance and full control via an optional IO-Link interface and an integrated valve for regulating the supporting compressed air.
The EXW1 communication unit wirelessly transmits digital, analog, and IO-Link signals, thereby reducing cabling effort and the risk of cable breakage on moving machine modules.
The EXW1 communication unit wirelessly transmits digital, analog, and IO-Link signals, thereby reducing cabling effort and the risk of cable breakage on moving machine modules.
The EQFSH electric slide drive from the EQ series simplifies commissioning with its integrated controller and batteryless absolute encoder. Two or three holding positions can be set without programming, while variants for loads of up to 68 kilograms and speeds of up to 1,200 millimeters per second cover a wide range of applications.
The EQFSH electric slide drive from the EQ series simplifies commissioning with its integrated controller and batteryless absolute encoder. Two or three holding positions can be set without programming, while variants for loads of up to 68 kilograms and speeds of up to 1,200 millimeters per second cover a wide range of applications.

The European semiconductor industry faces a demanding task: It must expand its production capacities while simultaneously increasing precision, energy efficiency and process stability. Topics such as automated factories, advanced packaging, artificial intelligence in production, sustainable manufacturing and resilient supply chains therefore shaped SEMICON Europa 2026. The trade fair took place from 10 to 13 November 2026 at Messe München and was once again held in parallel with the “electronica” trade fair.

SMC presented automation components for key processes in semiconductor and electronics manufacturing. The range extended from gentle workpiece handling and pressure and flow control to media control and electrostatic discharge.

Safely neutralising electrostatic charges

The new IZS51, IZT44/45 and IZSW ionisers were a particular focus. They reduce electrostatic charges that can damage components, attract particles or impair processes during transport and packaging. The compact IZS51 achieves a discharge time of up to 0.1 seconds, supports IO-Link and features a large display for status monitoring. An integrated valve unit stops the supporting compressed air during operation and can therefore reduce compressed-air consumption.

The slim IZT44 and IZT45 ionising bars are designed for particularly confined installation spaces. With a height of 23 millimetres and a width of 20 millimetres, they can also be installed in very tight spaces. The closely arranged electrodes shorten the discharge time by around 60 per cent compared with the previous model. Effective discharge is possible without additional compressed air. With the IZT45, up to four high-voltage modules can be connected to one controller.

Handling sensitive workpieces with minimal contact

For the sensitive handling of thin substrates and electronic assemblies, SMC demonstrated, among other things, the ZNC Bernoulli gripper. It picks up films, circuit boards and other sensitive workpieces with minimal contact. Compared with the previous model, the design reduces air consumption by up to 79 per cent in relation to lifting force. The maximum lifting force is 65 newtons. The vacuum portfolio is complemented by the ZFC series filters, the ZP2 and ZP3 suction cup families with conductive or semiconductive silicone as well as NBR, the compact ZH vacuum generator and the JSY1000-E valve manifold with mix-mounting capability.

Monitoring processes and reliably controlling media

Monitoring existing systems was also a focus. The PFUW flow sensor is mounted externally on the pipe. This means that neither intervention in the piping nor sensor components in contact with the medium are required. The risk of leaks, additional pressure loss and possible contamination of the pipe is avoided. Measuring ranges of up to 200 litres per minute enable use in cooling-water and supply circuits.

The ISE20 and ZSE20 digital pressure switches were shown at the exhibition stand in versions with an M12 connection. They offer a three-line display, short response times and, depending on the version, IO-Link communication and IP65 protection. With the D-MH1 analogue signal generator, up to three positions of a gripper or drive can be distinguished using just one switch. Small positional deviations and incipient tool wear can therefore be detected at an early stage. The sensor range is complemented by the D-MPG, PFES and NMG.

For machine communication, SMC presented the compact EXW1 wireless system. Depending on the version, it supports EtherCAT, EtherNet/IP, PROFINET in combination with IO-Link, analogue input or digital I/O. Particularly on moving modules, wireless transmission can reduce cabling requirements and avoid connection cables susceptible to interference. Other exhibits included the EQ electric actuator for dynamic motion applications.

Solutions for machine builders and semiconductor manufacturers

With its exhibition presence, SMC addressed manufacturers of semiconductors, photovoltaic cells and electronic assemblies as well as machine builders, system integrators and operators of frontend, backend and advanced packaging systems. The components on display addressed specific process risks: electrostatic charge, particle ingress, unstable media supply, high compressed-air consumption and limited installation space.


SMC Deutschland GmbH
63329 Egelsbach
Germany


Better informed: With YEARBOOK, NEWSLETTER, NEWSFLASH, NEWSEXTRA and EXPERT DIRECTORY

Stay up to date and subscribe to our monthly eMail-NEWSLETTER and our NEWSFLASH and NEWSEXTRA. Get additional information about what is happening in the world of cleanrooms with our printed YEARBOOK. And find out who the cleanroom EXPERTS are with our directory.

Vaisala Hydroflex Pfennig Reinigungstechnik GmbH HJM