More ...
Vaisala Berner International GmbH PMS C-Tec



  • Packaging
  • Translated with AI

Purity and Efficiency - Cleanroom Packaging in the GMP/MDR Environment

Plug&Pack packaging system in the cleanroom
Plug&Pack packaging system in the cleanroom
Plastic packaging for pharmaceutical products
Plastic packaging for pharmaceutical products
Plastic packaging for medical technology products
Plastic packaging for medical technology products

The production of pharmaceutical and medical technology products must meet high requirements for product quality, cleanliness and hygiene. To achieve this, the products must be packaged appropriately. In many cases, flexible plastic packaging is used as primary packaging. The avoidance of particulate, chemical and microbiological contamination is possible when the primary packaging is produced in a qualified cleanroom environment. Efficient automation suitable for cleanrooms can bring cleanliness and efficiency into balance.

Plastic packaging from the cleanroom as primary and secondary packaging

Plastic packaging, e.g. films, tubing, bags, side-gusseted bags or liners, comes into contact with the product as primary packaging (Figures 1 and 2) or serves as secondary packaging to ensure safety during transport and handling. In many cases, these also constitute sterile barrier systems (ISO 11607).

The importance of primary packaging is clearly formulated in Chapter 5.45 of the GMP Guide: “The selection, qualification … of suppliers of primary and printed packaging materials should be given attention similar to that given to suppliers of starting materials.” Packaging is therefore classified at the same quality level as pharmaceutical raw materials. Similarly, Medical Devices Regulation (EU) 2017/745, Chapter II, 11.7, states: “Packaging systems for non-sterile devices shall be such as to maintain the integrity and cleanliness of the product and, if the device is to be sterilised prior to use, minimise the risk of microbial contamination; the packaging system shall be suitable for the sterilisation method indicated by the manufacturer.” Essentially, this concerns protection against external influences, material compatibility with the product, any necessary sterile barrier properties, and labelling and traceability.

A risk-based assessment of the plastic primary packaging used is unavoidable. In principle, four groups of underlying contamination sources can be identified:

– Raw material risks: interaction between packaging and product
– Process risks: contamination of the GMP environment by packaging
– Logistics risks: packaging of the packaging
– Product risks: product-related criteria, e.g. leak-tightness, strength and sterile barrier properties

Cleanroom packaging to protect against contamination

The medium-sized company Strubl Kunststoffverpackungen, based in Wendelstein near Nuremberg, has addressed these special requirements and has been producing cleanroom packaging that meets the highest quality requirements for more than 15 years. To this end, bags and films are produced in a professional cleanroom environment qualified on the basis of ISO 14644 and meeting the GMP requirements of pharmaceutical customers. Validation of products and processes, hygiene management and traceability are just as standard as complete documentation and specifications with test certificates and customer audit procedures. What makes this special is that all products are manufactured according to customer specifications and therefore meet individual customer requirements one hundred percent. STRUBL can provide consulting support in assessing sustainability aspects and develop solutions together with customers.

Plastic packaging manufactured in a cleanroom, e.g. bags, side-gusseted bags, liners and tubular films, are the most frequently used packaging materials in the B2B process. Customers can benefit from the company’s innovative strength. For example, bags with an “easy-open” opening aid or antistatically equipped materials with Ph. Eur. conformity have been developed. This is particularly important in applications involving the packaging of bulk solids. Or another example: for freeze-drying processes (lyophilisation), Strubl has developed a precisely fitting “Cleantray”. This makes it possible to avoid complex cleaning processes for the trays. This improves equipment availability and therefore increases efficiency. Cleanzip cleanroom zip-lock bags, which can be resealed using a zip closure, are used in laboratory applications, sample collection, sample archiving, intermediate packaging and as primary packaging for components and parts, e.g. for diagnostic products.

Plug&Pack systems for automating packaging processes

Packaging in the cleanroom is often still carried out manually and, due to handling activities, always presents a contamination risk. With the flexible Plug&Pack system, cleanroom bags can be filled, labelled, printed and sealed either semi-automatically or fully automatically. The system can be integrated into an Industry 4.0 environment and thus also supports the digitalisation process in the cleanroom environment. The advantage of Plug&Pack systems lies in their customer-specific configuration, i.e. each customer can design the packaging system 100% according to their own requirements, e.g. packaging material variants, printing/labeling technology, feeding and handling systems. If Plug&Pack systems are operated in a controlled environment, a cleanroom-compatible design is of course essential.

Since production in a cleanroom system is always associated with high costs, further advantages of the Plug&Pack system come into play: space-saving design, easy cleaning of the components and automatic operation (up to 24 hours, depending on the product configuration). Particular emphasis should be placed on the integration of functions: labelling/marking, filling and sealing the packaging saves manual work steps. The quick-change system guarantees the shortest possible changeover times and is therefore also perfectly suited to changeover production and a wide variety of variants.

Cleanliness and efficiency

Cleanroom plastic packaging as primary/secondary packaging for pharmaceutical/medical technology applications can be packaged efficiently using the cleanroom-compatible Plug&Pack packaging system. This enables the user or packing company to achieve system-wide economic benefits: cleanliness and efficiency.



Strubl GmbH & Co. KG Kunststoffverpackungen
Richtweg 52
90530 Wendelstein
Germany
Phone: +49 9129 90350
email: christoph.strubl@strubl.de
Internet: http://www.strubl.de


Better informed: With YEARBOOK, NEWSLETTER, NEWSFLASH, NEWSEXTRA and EXPERT DIRECTORY

Stay up to date and subscribe to our monthly eMail-NEWSLETTER and our NEWSFLASH and NEWSEXTRA. Get additional information about what is happening in the world of cleanrooms with our printed YEARBOOK. And find out who the cleanroom EXPERTS are with our directory.

Pfennig Reinigungstechnik GmbH HJM MT-Messtechnik Systec & Solutions GmbH