New year, new job? View the vacancies! More ...

The designs by Goldbeck also integrate aesthetically pleasingly into the existing buildings.

A lot of emphasis is placed on the architecture and interior design of the building, which are intended to promote the aspect of

21.11.2018

Goldbeck is building for Weidmüller and the University of Paderborn on the Paderborn Future Mile

- Construction company impresses with concept for innovative research and development location
- Start of construction planned for 2018

The Bielefeld-based construction company Goldbeck is realizing a large-scale project at the Paderborn Future Mile as an investor and general contractor: "Future Mile…

For the Brandenburg City Hospital, WISAG is responsible for expanding the manufacturing area for cytostatics and sterile manufacturing forms, as well as the unit-dose area. (Source: WISAG Industrie Service Group, 2018)

For the Municipal Hospital Brandenburg, WISAG is responsible for expanding the manufacturing area for cytostatics and sterile manufacturing forms, as well as the unit-dose area. (Source: WISAG Industrie Service Group, 2018)

For the Brandenburg Municipal Hospital, WISAG is responsible for expanding the manufacturing area for cytostatics and sterile formulations as well as the unit-dose area. (Source: WISAG Industrie Service Group, 2018)

20.11.2018
‌
Buildings & Rooms

WISAG expands pharmacy of the Brandenburg Municipal Hospital

The Brandenburg Municipal Hospital is being expanded with a new building housing the pharmacy, pathology, and laboratories of the Brandenburg Medical University. The cleanroom experts from the WISAG Industrial Service Group, one of Germany's largest industrial service providers, are responsible for…

20.11.2018

Coating offers a wide temperature range and helps mitigate field installation failures

Micro-Measurements Introduces Moisture-Resistant Protective Coating for Maximum Strain Gage Sensor Stability

The Micro-Measurements® brand of Vishay Precision Group, Inc. (NYSE: VPG), industry experts in the design, development, and manufacture of resistive-foil sensors for high-precision strain, high-stress and force mechanism measurements, today introduced the Gagekote #1, an expansion of the Gagekote Se…

Production in the clean room according to GMP Grade C of the pre-fillable plastic syringe with cannula.

Cannula is insert-molded directly in the injection molding process. The syringe is free of tungsten and adhesive.

The new Gx RTF ClearJect plastic syringe.

14.11.2018

Gerresheimer produces high quality COP syringes in Germany

Series production of Gx RTF ClearJect plastic syringes started

The pharmaceuticals and health care specialist Gerresheimer has commenced with series production of the new Gx RTF ClearJect syringes. The products of the high performance plastic COP (Cyclo Olefin Polymer) are used where especially sophisticated medications need to be packaged. The new Gx RTF Clear…

With their new injection units and thanks to ecodrive as a standard feature, the dual-platen injection moulding machines from the ENGEL duo series achieve even greater efficiency and precision. During Plast Eurasia, ENGEL will be producing car engine covers on a duo 3660/500 machine. (Picture: ENGEL)

The production of delicate needle holders demands high precision and process consistency. At Plast Eurasia, a cleanroom version of a self-optimizing ENGEL e-victory injection molding machine will be used for this purpose. (Image: ENGEL)

Kompakt integriert: Der Rohrverteiler von ENGEL findet innerhalb der Maschinenschutzverkleidung Platz. (Bild: ENGEL) / Compact integration: The pipe distributor by ENGEL fits inside the machine's safety guard. (Picture: ENGEL)

The intelligent assistance system iQ weight control compensates for process fluctuations before rejects are produced. (Picture: ENGEL)

The new TIG 2go dashboard solution makes it genuinely easy to get started in the world of MES. (Picture: TIG)

14.11.2018

ENGEL at Plast Eurasia 2018

Smart solutions for greater productivity, quality and cost effectiveness

Optimum efficiency, maximum performance and consistent quality: ENGEL, the Austrian injection moulding machine manufacturer and system expert, will demonstrate how flawless interplay between injection moulding machine, automation, and Industry 4.0 can reconcile these demands cost-effectively and sus…

Award ceremony at the Ministry of Economics, Labor, and Housing Baden-Württemberg: Johannes Horsch (second from the right) from the Mannheim project group for automation in medicine and biotechnology PAMB receives the honor from Alexander Tony Mast (left) from Deutsche Bank, Ute Weiland, Managing Director of the initiative

The hybrid operating room serves as an experimental field for researchers and medical technology companies. (Source: Fraunhofer IPA / Photo: Vanessa Stachel)

14.11.2018
‌
R+D & Community of Interest

Hybrid-OP is an "Excellent Place" 2018

The hybrid operating room of the Mannheim project group for automation in medicine and biotechnology PAMB, which belongs to the Fraunhofer IPA, is one of the twelve "Outstanding Places" from Baden-Württemberg, recognized as winners in the "Germany – Land of Ideas" innovation competition.

On the groun…

New for POWTECH 2019 from April 9 to 11, 2019: the Networking Campus

14.11.2018

POWTECH launches new “Networking Campus” think tank in 2019

POWTECH 2019 will see the premiere of the Networking Campus, the new POWTECH think tank for the technologies and markets of the future. The Networking Campus is a communication hub and discussion platform for young researchers, start-ups and developers. The heart of the campus is an open presentatio…

14.11.2018

Strong international presence, more technology on display and local visitors all on the rise

Record attendance at INDOPLAS, indopack and indoprint

- 24,918 trade visitors from Indonesia and around the world
- 360 exhibitors from 21 countries showcased best-in-industry solutions
- well-attended industry seminars and presentations

The Indonesian International Plastics, Packaging and Printing Exhibitions, INDOPLAS, indopack and indoprint, welcomed…

With the new construction at the location of the German branch, DEVELCO is taking the manufacturing process of its pharmaceuticals into its own hands for the first time. (Image credit: Burckhardt+Partner)

In the new DEVELCO production areas, an LW PHARMA TERRAZZO by LEONHARD WEISS Floor Technology has been installed as a cleanroom floor. (Image credit: © LEONHARD WEISS)

The appearance of LW PHARMA TERRAZZO is very similar to real terrazzo: With matte or silk-matte surfaces in various shades, it can be individually adapted to the respective application area. (Image credit: © LEONHARD WEISS)

The ground consists of a granular material that is mixed directly on the construction site with a binder to form a homogeneous mortar and applied as a single, continuous, jointless floor surface. (Image credit: © LEONHARD WEISS)

The advantage of the cleanroom floor: maximum flexibility. Because the interior walls are only erected after the floor has been laid. (Image credit: © LEONHARD WEISS)

After erecting the walls, the wall connections can also be completed with the paste-like granulate-binding mixture and sealing in a second step. (Image credit: © LEONHARD WEISS)

Unlike pre-fabricated slab or roll products, the LW PHARMA TERRAZZO easily adapts to shapes and details on site. (Image credit: © LEONHARD WEISS)

The LW PHARMA TERRAZZO could be disinfected just as effectively as stainless steel in a test: For all tested germs, the contamination was reduced by more than 5 log10 steps after disinfection. (Image credit: © LEONHARD WEISS)

All floor connections such as pedestal attachments, cleanroom drains, slope formations, pipe penetrations, floor scales, and other apparatuses, as well as three-sided wall-floor transitions, remain sealed and closed. (Image credit: © LEONHARD WEISS)

07.11.2018

New DEVELCO production in Schopfheim with LW PHARMA TERRAZZO

No pharmacy shelf fits better

Planning and implementation of pharmaceutical production are complex projects. Cost-intensive design changes are not uncommon. Therefore, flexible space allocation within the production building is even more important, allowing adjustments without additional effort when needed. This is also well und…

From left: Joachim Lehmann (Director BU Medical), Professor Hanns-Peter Knaebel (CEO Röchling Group and Medical Division), Dr. Carl Peter Thürmel (Vice-Chairman of the Advisory Board), and Johannes Freiherr von Salmuth (Chairman of the Advisory Board) (Image: Röchling)

07.11.2018

Röchling Group opens Smart Factory in Brensbach

- Medical Business Area Continues Growth
- Site expands and modernizes
- Production now in GMP Class C

The Röchling Group has expanded and modernized its existing plant in Brensbach in the Odenwald. From now on, production is also carried out in hygiene-sensitive areas of GMP Class C and under Smart Fa…

A look at the NEWSLETTER

Better informed: With YEARBOOK, NEWSLETTER, NEWSFLASH, NEWSEXTRA and EXPERT DIRECTORY

Stay up to date and subscribe to our monthly eMail-NEWSLETTER and our NEWSFLASH and NEWSEXTRA. Get additional information about what is happening in the world of cleanrooms with our printed YEARBOOK. And find out who the cleanroom EXPERTS are with our directory.