Here you can find your CLEANROOM EXPERT More ...
Becker ClearClean C-Tec Vaisala

cleanroom online
Deutsch   English



Metal laser melting is changing the future of manufacturing

Printing 3D geometries versus molding them – new perspectives for design and function

Dr. Florian Bechmann: „Die Sicht der Kunden konzentriert sich derzeit sehr stark auf Qualitätsanforderungen. Dies erfordert ein hohes Niveau im Zusammenspiel von Optik, Mechanik, Steuerungstechnik und Software einer Anlage.“ (Bildquelle: Concept Laser GmbH) / Dr. Florian Bechmann:
Dr. Florian Bechmann: „Die Sicht der Kunden konzentriert sich derzeit sehr stark auf Qualitätsanforderungen. Dies erfordert ein hohes Niveau im Zusammenspiel von Optik, Mechanik, Steuerungstechnik und Software einer Anlage.“ (Bildquelle: Concept Laser GmbH) / Dr. Florian Bechmann: "Customers are currently heavily focused on quality requirements. This requires the right combination of optics, mechanics, control technology and software." (Photo: Concept Laser GmbH)
Dr. Florian Bechmann: „Diese 3D-Darstellung wird zukünftig die Transparenz des Prozesses steigern und erfasst das Bauteil in seiner strukturellen Gesamtheit. Dies bedeutet Transparenz in einem hochdynamischen, schnellen Prozess, den der Bediener nur mit besonderen Hilfen meistern kann.“ (Bildquelle: Concept Laser GmbH) / Dr. Florian Bechmann:
Dr. Florian Bechmann: „Diese 3D-Darstellung wird zukünftig die Transparenz des Prozesses steigern und erfasst das Bauteil in seiner strukturellen Gesamtheit. Dies bedeutet Transparenz in einem hochdynamischen, schnellen Prozess, den der Bediener nur mit besonderen Hilfen meistern kann.“ (Bildquelle: Concept Laser GmbH) / Dr. Florian Bechmann: "This type of 3D imaging will increase the transparency of the process in the future by capturing the component in its structural entirety. This creates transparency in a fast, highly dynamic process, which operators can only master with special aids." (Photo: Concept Laser GmbH)
„Inline Process Monitoring“ mit dem QM-Modul QMmeltpool: Auf einer sehr kleinen Fläche von 1x1 mm² überwacht das System mittels Kamera und Foto-Diode den Prozess. Anschließend wird der Prozess dokumentiert. (Bildquelle: Concept Laser GmbH) /
„Inline Process Monitoring“ mit dem QM-Modul QMmeltpool: Auf einer sehr kleinen Fläche von 1x1 mm² überwacht das System mittels Kamera und Foto-Diode den Prozess. Anschließend wird der Prozess dokumentiert. (Bildquelle: Concept Laser GmbH) / "Inline Process Monitoring" with the QMmeltpool QM module: the system uses a camera and photo diode to monitor the process within a very small area of 1x1 mm². The process is then documented. (Photo: Concept Laser GmbH)
Aktive Qualitätssicherung mit dem QMmeltpool: Für das menschliche Auge ist kein Fehler erkennbar. Abweichungen in der Bauteilqualität erkennt QMmeltpool dennoch. (Bildquelle: Concept Laser GmbH) / Active quality assurance using QMmeltpool: although the human eye is incapable of detecting defects, QMmeltpool nevertheless identifies deviations in component quality. (Photo: Concept Laser GmbH)
Aktive Qualitätssicherung mit dem QMmeltpool: Für das menschliche Auge ist kein Fehler erkennbar. Abweichungen in der Bauteilqualität erkennt QMmeltpool dennoch. (Bildquelle: Concept Laser GmbH) / Active quality assurance using QMmeltpool: although the human eye is incapable of detecting defects, QMmeltpool nevertheless identifies deviations in component quality. (Photo: Concept Laser GmbH)
QMcoating: Ohne QMcoating kann es zu unzureichender Beschichtung des Layer kommen (die roten Bereiche weisen auf fehlendes Pulvermaterial hin); Ansatz dazu: Mit QMcoating wird der Dosierfaktor des Pulvers innerhalb der Toleranz angepasst. (Bildquelle: Concept Laser GmbH) / QMcoating: without QMcoating, the layer may be insufficiently coated (the red areas indicate a lack of powder material); with the QMcoating approach, however, the powder dosing factor is adjusted within the tolerance range. (Photo: Concept Laser GmbH)
QMcoating: Ohne QMcoating kann es zu unzureichender Beschichtung des Layer kommen (die roten Bereiche weisen auf fehlendes Pulvermaterial hin); Ansatz dazu: Mit QMcoating wird der Dosierfaktor des Pulvers innerhalb der Toleranz angepasst. (Bildquelle: Concept Laser GmbH) / QMcoating: without QMcoating, the layer may be insufficiently coated (the red areas indicate a lack of powder material); with the QMcoating approach, however, the powder dosing factor is adjusted within the tolerance range. (Photo: Concept Laser GmbH)
QMcoating: Mittels QMcoating kann gegenüber einer manuellen Bedienung bis zu 25% Pulver eingespart werden (Einsparungspotenzial = schraffierte Fläche). (Bildquelle: Concept Laser GmbH) / QMcoating: Use of QMcoating can save up to 25% of the powder quantity required compared to manual operation (potential savings = shaded area). (Photo: Concept Laser GmbH)
QMcoating: Mittels QMcoating kann gegenüber einer manuellen Bedienung bis zu 25% Pulver eingespart werden (Einsparungspotenzial = schraffierte Fläche). (Bildquelle: Concept Laser GmbH) / QMcoating: Use of QMcoating can save up to 25% of the powder quantity required compared to manual operation (potential savings = shaded area). (Photo: Concept Laser GmbH)
Größtes, generativ gefertigtes Bauteil: Ein Getriebegehäuse aus Aluminium (Maße: x: 474mm; y: 367mm; z: 480m – exklusive Bauplattenhöhe) entsteht mit Aufbauraten von > 50cm³/h aus Pulver. (Bildquelle: Concept Laser GmbH) / The largest part produced using additive manufacturing: a gear housing made of aluminum (dimensions: x: 474mm; y: 367mm; z: 480m – excluding build platform height) is constructed from powder at rates of > 50cm³/h. (Photo: Concept Laser GmbH)
Größtes, generativ gefertigtes Bauteil: Ein Getriebegehäuse aus Aluminium (Maße: x: 474mm; y: 367mm; z: 480m – exklusive Bauplattenhöhe) entsteht mit Aufbauraten von > 50cm³/h aus Pulver. (Bildquelle: Concept Laser GmbH) / The largest part produced using additive manufacturing: a gear housing made of aluminum (dimensions: x: 474mm; y: 367mm; z: 480m – excluding build platform height) is constructed from powder at rates of > 50cm³/h. (Photo: Concept Laser GmbH)
Schmuckbild LaserCUSING. (Bildquelle: Concept Laser GmbH) / Cover Picture LaserCUSING (Photo: Concept Laser GmbH)
Schmuckbild LaserCUSING. (Bildquelle: Concept Laser GmbH) / Cover Picture LaserCUSING (Photo: Concept Laser GmbH)

The magic word in industrial manufacturing these days is 3D printing. The shift from mold-based component concepts to additive geometric freedom is not just a fad, it's a major trend. The advantages are striking: faster processing times, lower-cost components and a level of design freedom that is so far unheard of. This dynamic market development has spurred two-digit growth rates in the industry. Dr. Florian Bechmann, Head of Development at Concept Laser, reports on trends and increased quality requirements.

The main forces behind this momentum include the automotive, medical technology and aerospace industries. These technology drivers demand high standards, not only in terms of quality and choice of materials but also with regard to quantitative aspects such as increased productivity. Customers like these require faster construction times or more parts in a single build chamber. To meet the needs of the automotive industry, Concept Laser developed the X line 1000R, which currently offers the largest build chamber. The transition from a 400W laser to a 1000W laser represents an important milestone for the process. It was developed in close cooperation with laser specialists from the Fraunhofer Institute. The goal was to develop quicker processes that are also more affordable. Very large laser melting systems serve as time-saving solutions for developing modern vehicle engines or large-scale aerospace components.

Aerospace relies consistently on additive processes

The aerospace industry is the source of an increasing amount of innovation that demands high-quality solutions. Many of these involve the use of reactive materials such as titanium or aluminum-based alloys, which must be produced in closed systems to ensure reliability and quality. Customers such as NASA, the German Aerospace Center (DLR), Honeywell, Snecma, Aerojet/Rocketdyne and EADS subsidiary Astrium Space Transportation see the additive process as the next broad-scale step in the evolution of modern production. NASA engineers are even considering using additive manufacturing to produce components on the ISS – in orbit. The advantage of this would be the ability to produce parts in space using CAD data. In the US, we are seeing major investments in capital and human resources, not only in research and instruction but in industry as well. The Europeans can contribute their research and mechanical engineering capabilities mainly in the US and Europe. In Europe, the EU is promoting this process through projects like AMAZE due to a strong belief in its sustainability and innovative capacity.

Medical technology as an important cornerstone

Metal laser melting is revolutionizing medical technology: traditional process chains are being completely reconceptualized. LaserCUSING parts are in demand for implants since their porous surfaces incorporate well into the body while providing the necessary elasticity. One rising application is the affordable and rapid production of dental prosthetics from biocompatible materials. These are highly adaptable, long-lasting dental solutions, as opposed to dental prosthetics that must be handcrafted.

Value retention through retrofitting

The process is suitable for retrofitting as well: worn-out turbine parts from power plants or aircraft can be quickly and affordably regenerated. In this hybrid technique, layers of the exact same material can be applied additively to the existing part. In addition to regeneration, new whole parts are also produced for turbine technology applications.

R&D efforts are ramping up

In an effort to boost its development activities and meet the increased demands of the market, Concept Laser opened a new development center in late 2013. For design and development engineers from a variety of different industries, metal laser melting offers a fascinating range of solutions. The company's goal is to meet this market trend head-on through innovation. When it comes to complex systems, the right combination of optics, mechanics, control technology, software and powder material is the key. The engineers at the new Concept Laser development center are working on "discreet innovations" that have not yet been revealed to the public.

New options for designers

LaserCUSING allows the incorporation of features such as cooling channels, important for components exposed to high thermal loads or for reducing injection molding cycle times in the plastics industry. The offshore industry is considering installing laser melting systems on drilling platforms, which would allow for independent, on-site production of certain components. The technology is not fixed to a specific location and can be operated locally.

Ensuring quality in real-time

Concept Laser offers quality management modules for laser melting systems. Two modules are available with two different approaches: QMmeltpool and QMcoating. Dr. Bechmann explains the difference: "With QMmeltpool, the system uses a camera and photo diode to record signals during the process. This data can then be compared to reference values. The optical system is designed coaxially. It allows the camera to record a very small area, about 1 mm², of the melting pool. It can detect impaired laser performance due to contamination of the F-theta lens or natural aging of the laser, as well as deviations in the dosing factor." The second approach is that of the QMcoating module, which ensures that the optimal powder quantity is used, thus reducing the amount of unnecessary material (by up to 25%) and allowing faster set-up times. QMcoating monitors the layer surface while powder is being applied. If too little or too much powder is dosed, the dosing factor is adjusted accordingly, i.e., actively counteracted. The two QM modules monitor and document the process in real-time, thereby ensuring reproducible quality.

Key factors for improved quality are in the details

With Concept Laser, there is always a characteristic division between build chamber and handling area. According to Dr. Bechmann, this ensures maximum work safety and ergonomics. The systems transport powder automatically in containers. In metal laser melting technology, a closed system offers many advantages, not only in terms of component quality, as oxygen contamination is avoided, but also in terms of safety when working with reactive materials like titanium or titanium alloys. The safety requirements for the system are defined by the EU's ATEX directive.

The future of laser melting

Excellent prospects
The scope of applications for metal laser melting is growing, as is the range of materials. As the market becomes more complex, Concept Laser must be ready to provide customers with expert advice. "With these new types of materials, the technology must be exactly right," says Dr. Bechmann. "At the same time, design requirements for components are also becoming more complex. They include everything from lightweight construction or foam-like structures to integration of elements such as cooling circuits in components." With so many applications in so many industries, the need to develop innovative solutions is higher than ever. Another aspect is the growing importance of quality among users. Customers expect active process monitoring and series production capability, i.e., reproducibility at an industrial level.

Quality requirements increase
"Customers are currently heavily focused on quality requirements. Systems must therefore possess the right combination of optics, mechanics, control technology and software," explains Dr. Bechmann. These key factors also depend on comprehensive quality monitoring. The patented QM modules from Concept Laser ensure quality, operability and ability to intervene during the highly dynamic construction process in real-time. Besides geometry, density and productivity, customers today are primarily interested in the quality of the final product. Dr. Bechmann explains: "Two approaches are particularly useful in ensuring a high level of quality: active process monitoring using machine technology and developments in materials. This includes the certification of materials, such as in medical technology, or manufacturer-specific instructions, which must be complied with in the automotive and aerospace sectors."

Developments in the near future
In process monitoring, Dr. Bechmann sees important developments in the near future. 2D maps are generated during the construction process and will ultimately be representable using 3D models. This is comparable to CT scans in medicine. "This type of 3D imaging will increase the transparency of the process in the future by capturing the component in its structural entirety," explains Dr. Bechmann. "This creates transparency in a fast, highly dynamic process, which operators can only master with special aids." Dr. Bechmann expects customer demand for speed in component building to grow. "There are two ways to achieve this: one is with higher capacity lasers, i.e., 1000W lasers versus 400W, like the X line 1000R; another is by using multiple lasers." In the future, multiple laser sources will increase build rate significantly, in which case the advantages of using known process parameters will have to be weighed against the increasing complexity of optical construction. These concepts will increase not only the number of the lasers but most of the other optical components as well.

Two additional aspects of laser melting

Green technology: sustainability and the environmental benefits of additive manufacturing
Laser melting is a highly sustainable manufacturing process. Numerous factors makes laser melting a quantum leap in reducing carbon footprint:

•    no more molding or casting expenditures
•    reduced logistics through local or decentralized manufacturing (such as on offshore platforms or space stations)
•    material savings during the process
•    no special noise emissions
•    fast prototype or test sample construction
•    component retrofitting through hybrid technology
•    no oil or coolant emissions as with conventional machine technology
•    residual heat from lasers can be used to heat buildings
•    low system power consumption
•    on-demand production
•    one-of-a-kind production
•    less waste

A whole range of options for sustainable manufacturing. It's not surprising that laser melting is termed a "green technology" and has been classified by the EU as Key Enabling Technology for future manufacturing.

Industrial vs. consumer 3D printing
3D printers are the main attraction at all the trade shows. Interested onlookers ask whether they can be used to print Lego blocks or even food. Clearly, there is growing interest in the ability to print three-dimensional objects with laser printers versus simply 2D. For technical components, affordable printers for less than 1000 euros are already a reality.

Of course, these have nothing to do with metal laser melting in industry. Consumer applications differ from industrial ones: industrial systems are heavily geared toward high levels of quality, precise component dimensions or the parallel construction of many parts in a single space and at different speeds than in the consumer segment. Industrial manufacturers, such as those in the aerospace, turbine, medical and dental technology, automotive, watch and jewelry-making industries, have special quality standards and material requirements, including material and process certifications. These industries expect high-performance metals and alloys as well as reactive materials with high dimensional accuracy, reproducibility and safety.  The necessary system technology must possess the right combination of optics, mechanics, control technology and software with QA elements to ensure highly dynamic manufacturing in real-time.

The basic operating principle is the same; however, consumer 3D printing solutions are more like the V-2 rocket developed by Wernher von Braun than modern rocket technology. Therefore, we're not talking apples versus oranges, but rather two completely different philosophies and applications.

Keyword: LaserCUSING®
The LaserCUSING® process is used to create mechanically and thermally stable metallic components with high precision. Depending on the application, it can be used with stainless and tool steels, aluminum and titanium alloys, nickel-based superalloys, cobalt-chromium alloys or precious metals such as gold or silver alloys.

Procedures
With LaserCUSING®, finely pulverized metal is fused using a high-energy fiber laser. After cooling, the material solidifies. Component contour is achieved by directing the laser beam with a mirror deflection unit (scanner). Construction takes place layer by layer (with each layer measuring 15-100 microns) by lowering the bottom surface of the construction space, then applying and fusing more powder.

Concept Laser systems stand out due to their stochastic control of the slice segments (also referred to as "islands"), which are processed successively. The patented process significantly reduces tension during the manufacture of very large components.



Concept Laser GmbH
96215 Lichtenfels
Germany


Better informed: With YEARBOOK, NEWSLETTER, NEWSFLASH and EXPERT DIRECTORY

Stay up to date and subscribe to our monthly eMail-NEWSLETTER and our NEWSFLASH. Get additional information about what is happening in the world of cleanrooms with our printed YEARBOOK. And find out who the cleanroom EXPERTS are with our directory.

PPS HJM PMS MT-Messtechnik