Energieschluckern on the trace ￜ.

It occurs again and again that engines, exhausts, blowers or pumps by internal damage or external influences increase their power input. This is not only determined in practice at all or after long time. A strong rise of the energy costs are possibly the one consequence, one no longer correctable damage to the aggregate the other one. Low-priced current switches with adjustable limit value and relay exit help in such cases to recognize the problem promptly. A fast amortization of the acquisition is guaranteed!ￜￜ ￜLike current pliers these current switches measure the river flowing by a conduction. Two different designs with firm coil or opening by hinges coil permit a simple assembly with new installations just like the comfortable retrofit with an existing installation, without this must be changed. These switches are offered with different current ranges as well as switching points firm-Inge-placed and variable within the range of 150 mA to 135 A. The relay exit (solvent State) is loadable up to 1A with 30V AC/DC. LEDs signal the current status. Beside a too high power input also a too small power input, i.e. the loss of an aggregate can be determined. Errors can be determined by this continuous monitoring of the working current such as bearing failures, bad lubrication, contamination also with such aggregates, where other monitoring concepts would not be economical.

This text was translated automatically.

Synotech GmbH
Franzosenberg 9
52441 Linnich
Telephone : 02462-9919-0
Fax : 02462-9919-79
E-Mail : hsaari@synotech.de
Internet : www.synotech.de

<<<back